Cisco Nexus 3548

513
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show routing-context
show routing-context
To display the virtual routing and forwarding (VRF) scope for all EXEC commands, use the show
routing-context command.
show routing-context
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes EXEC mode
Command History
Examples This example shows how display the current routing context:
switch# show routing-context
Current Route Context: default
switch#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
routing-context vrf Configures the routing context.