Cisco Nexus 3548

526
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show startup-config arp
show startup-config arp
To display the Address Resolution Protocol (ARP) configuration in the startup configuration, use the
show startup-config arp command.
show startup-config arp [all]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the ARP startup configuration:
switch# show startup-config arp
Related Commands
all (Optional) Displays configured and default information.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
copy running-config
startup-config
Copies the running configuration to the startup configuration file.
ip arp timeout Configures an ARP timeout.
show running-config
arp
Displays the ARP running configuration.