Cisco Nexus 3548

440
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp dampening
show ip bgp dampening
To display Border Gateway Protocol (BGP) dampening information, use the show ip bgp dampening
command.
show ip bgp [[ipv4 ] {unicast | multicast} | all] dampening {dampened-paths [regexp
expression] | flap-statistics | history-paths [regexp expression] | parameters} [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the dampening information:
switch(config)# show ip bgp dampening dampened-paths
Related Commands
ipv4 (Optional) Displays BGP information for the IPv4 address family.
unicast Displays BGP information for the unicast address family.
multicast Displays BGP information for the multicast address family.
all Displays BGP information for all address families.
dampened-paths Displays all dampened paths.
regexp
expression
(Optional) Displays information that matches the regular expression.
flap-statistics Displays flap statistics for routes.
history-paths Displays all history paths.
parameters Displays all dampening parameters.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
clear ip bgp
dampening
Clears BGP route flap dampening information.
dampening (BGP) Configures the route flap dampening.