Cisco Nexus 3548

441
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp extcommunity
show ip bgp extcommunity
To display Border Gateway Protocol (BGP) routes that match an extended community, use the show ip
bgp extcommunity command.
show ip bgp extcommunity generic {non-transitive | transitive} [as4-number] [exact-match]
[vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match an extended community:
switch(config)# show ip bgp extcommunity generic transitive 1.3:30
Related Commands
generic Displays the routes that match the generic specifice extended communities.
non-transitive Displays the routes that match the non-transitive extended communities.
transitive Displays the routes that match the transitive extended communities.
as4-number (Optional) AS number. The as4-number is a 32-bit integer in the form of a
plaintext integer or <higher 16-bit decimal number>.<lower 16-bit decimal
number> .
exact-match (Optional) Displays an exact match of the extended community.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be
any case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip extcommunity-list Creates an extended community list.