Cisco Nexus 3548

190
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
ip ospf shutdown
ip ospf shutdown
To shut down an Open Shortest Path First (OSPF) interface, use the ip ospf shutdown command. To
return to the default, use the no form of this command.
ip ospf shutdown
no ip ospf shutdown
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Interface configuration mode
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to shut down OSPF on an interface:
switch# configure terminal
switch(config)# interface ethernet 1/2
switch(config-if)# no switchport
switch(config-if)# ip ospf shutdown
switch(config-if)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves the configuration changes to the startup configuration file.
show ip ospf Displays OSPF information.