456
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip client
show ip client
To display information about the internal IP clients, use the show ip client command.
show ip client [name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the IP client information for the Address Resolution Protocol (ARP):
switch(config)# show ip client arp
Related Commands
name (Optional) Name of the client.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip process Displays information about the IP process.
To Next Page
Loading...
