Cisco Nexus 3548

323
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
routing-context vrf
routing-context vrf
To set the virtual routing and forwarding (VRF) scope for all EXEC commands, use the routing-context
vrf command. To return to the default setting, use the no form of this command.
routing-context vrf vrf-name
no routing-context vrf vrf-name
Syntax Description
Command Default default VRF
Command Modes EXEC mode
Command History
Usage Guidelines This feature automatically restricts the scope of the output of EXEC commands to the configured VRF.
You can override this scope by using the VRF keywords available for some EXEC commands.
This command does not require a license.
Examples This example shows how to limit EXEC commands to the management VRF:
switch# routing-context vrf management
switch%management#
Related Commands
vrf-name Name of the VRF instance. The name can be any case-sensitive,
alphanumeric string up to 32 characters.
The VRF name can be one of the following:
• default—Specifies the default VRF.
• management—Specifies the management VRF.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show routing-context Displays the current routing context.