Cisco Nexus 3548

450
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp peer-session
show ip bgp peer-session
To display Border Gateway Protocol (BGP) peer session template information, use the show ip bgp
peer-session command.
show ip bgp peer-session name
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display the BGP peer session:
switch(config)# show ip bgp peer-session test1
Related Commands
name Name of a BGP template. The name can be any case-sensitive, alphanumeric string
up to 80 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
inherit peer-session Inherits a peer session template for a neighbor.
template peer-session Configures a peer session template.