Cisco Nexus 3548

131
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
flush-routes (EIGRP)
flush-routes (EIGRP)
To flush all EIGRP routes in the unicast RIB when an EIGRP instance restarts, use the flush-routes
command. To disable this feature, use the no form of this command.
flush-routes
no flush-routes
Syntax Description This command has no arguments or keywords.
Command Default Disabled
Command Modes Router configuration mode
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to flush routes when an EIGRP instance restarts:
switch# configure terminal
switch(config)# router eigrp Test1
switch(config-router)# flush-routes
switch(config-router)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip eigrp
interfaces
Displays information about EIGRP interfaces.