Cisco Nexus 3548

369
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
test forwarding inconsistency
test forwarding inconsistency
To trigger the Layer 3 inconsistency checker for the Forwarding Information Base (FIB), use the test
forwarding inconsistency command.
test forwarding inconsistency [ip | ipv4] [unicast] [vrf vrf-name] [module {slot | all}] [stop]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to trigger the Layer 3 inconsistency checker for all modules:
switch# test forwarding inconsistency module all
This example shows how to stop the Layer 3 inconsistency checker for all modules:
switch# test forwarding inconsistency module all stop
Related Commands
ip (Optional) Specifies the inconsistency check for IPv4 routes.
ipv4 (Optional) Specifies the inconsistency check for IPv4 routes.
unicast (Optional) Specifies the inconsistency check for unicast routes.
module (Optional) Specifies the inconsistency check for one or more modules.
slot Module number. The range depends on the platform.
all (Optional) Specifies the inconsistency check for all modules.
stop (Optional) Stops the inconsistency check.
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) context name.
The name can be any case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
clear forwarding
inconsistency
Clears the FIB inconsistencies.
show forwarding
inconsistency
Displays information about the FIB inconsistencies.