Cisco Nexus 3548

442
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp extcommunity-list
show ip bgp extcommunity-list
To display Border Gateway Protocol (BGP) routes that match an extended community list, use the show
ip bgp extcommunity-list command.
show ip bgp extcommunity-list commlist-name [exact-match] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command requires the LAN Enterprise Services license.
Examples This example shows how to display routes that match a community list:
switch(config)# show ip bgp extcommunity-list test1
Related Commands
commlist-name Name of an extended community-list. The commlist-name can be any case-sensitive,
alphanumeric string up to 63 characters.
exact-match (Optional) Displays an exact match of the extended communities.
vrf vrf-name (Optional) Specifies the virtual router context (VRF) name. The name can be any
case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip extcommunity-list Creates an extended community list.