Cisco Nexus 3548

309
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
restart rip
restart rip
To restart a Routing Information Protocol (RIP) instance and remove all associated neighbors, use the
restart rip command.
restart rip instance-tag
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to restart the RIP instance and remove all neighbors:
switch# configure terminal
switch(config)# restart rip Enterprise
switch(config)#
Related Commands
instance-tag Name for an RIP routing instance. The name can be a maximum of
20 alphanumeric characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
copy running-config
startup-config
Saves the configuration in the startup configuration file.
show ip eigrp
interfaces
Displays information about EIGRP interfaces.