Cisco Nexus 3548

527
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show track
show track
To show information about object tracking, use the show track command.
show track [object-id] [interface | ip route] [brief]
Syntax Description
Command Default Display information for all tracked objects.
Command Modes Any command mode
Command History
Examples This example shows how to display information about tracked interfaces:
switch# show track interface
This example shows how to display information about tracked IP routes:
switch# show track ip route
This example shows how to display brief information about tracked objects:
switch# show track brief
Related Commands
object-id (Optional) Tracking ID. The range can be from 1 to 500.
interface (Optional) Displays information about tracked interfaces.
ip route (Optional) Displays information about tracked IP routes.
brief (Optional) Displays brief information about tracked objects.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
track interface Tracks the state of an interface.
track ip route Tracks the state of an IP route.