Cisco Nexus 3548 User Manual

120
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
eigrp log-neighbor-changes
eigrp log-neighbor-changes
To enable the logging of changes in Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor
adjacencies, use the eigrp log-neighbor-changes command. To disable the logging of changes in EIGRP
neighbor adjacencies, use the no form of this command.
eigrp log-neighbor-changes
no eigrp log-neighbor-changes
Syntax Description This command has no arguments or keywords.
Command Default Adjacency changes are logged.
Command Modes Address-family configuration mode
Router configuration mode
Router VRF configuration mode
Command History
Usage Guidelines This command requires the LAN Base Services license.
Examples This example shows how to enable logging of neighbor changes for EIGRP process 209:
switch# configure terminal
switch(config)# router eigrp 209
switch(config-router)# eigrp log-neighbor-changes
switch(config-router)#
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
log-neighbor-changes Enables logging of EIGRP neighbor changes.
log-neighbor-warnings Enables logging of EIGRP neighbor warnings.
log-adjacency-changes Enables logging of EIGRP adjacency state changes.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back