507
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip traffic
show ip traffic
To display IP traffic information, use the show ip traffic command.
show ip traffic
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the IP traffic information:
switch(config)# show ip traffic
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip process Displays information about the IP process.
To Next Page
Loading...
