Cisco Nexus 3548

145
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
ip address
Examples This example shows how to configure the IP address 192.168.0.27 as the primary address and
192.168.0.5 as the secondary address for Ethernet interface 1/5:
switch# configure terminal
switch(config)# interface ethernet 1/5
switch(config-if)# no switchport
switch(config-if)# ip address 192.168.0.27 255.255.255.0
switch(config-if )# ip address 192.168.0.5 255.255.255.0 secondary
switch(config-if)#
Related Commands Command Description
copy running-config
startup-config
Saves the configuration change to the startup configuration file.
no switchport Enables an interface for Layer 3 configuration.
show ip interface Displays interfaces configured for IPv4.