Cisco Nexus 3548

296
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
redistribute (EIGRP)
You must configure a default metric to redistribute routes from another protocol into EIGRP. You can
configure the default metric with the default-metric command or with the route map configured with
the redistribute command.
This command requires the LAN Enterprise Services license.
Examples This example shows how to redistribute cause BGP routes into an EIGRP autonomous system:
switch# configure terminal
switch(config)# router eigrp 209
switch(config-router) address-family ipv4 unicast
switch(config-router-af)# redistribute bgp 64496
switch(config-router-af)
Related Commands Command Description
default-metric
(EIGRP)
Sets the default metrics for routes redistributed into EIGRP.
show ip eigrp Displays EIGRP information.