Cisco Nexus 3548

343
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
set local-preference
Related Commands Command Description
match as-path Matches a BGP autonomous system path access list.
match community Matches a BGP community.
match interface (IP) Distributes routes that have their next hop out one of the interfaces
specified.
match ip next-hop Redistributes any routes that have a next-hop router address passed
by one of the access lists specified.
match ip route-source Redistributes routes that have been advertised by routers and access
servers at the address specified by the access lists.
match metric (IP) Redistributes routes with the metric specified.
match route-type (IP) Redistributes routes of the specified type.
match tag Redistributes routes in the routing table that match the specified
tags.
route-map (IP) Defines the conditions for redistributing routes from one routing
protocol into another.
set automatic-tag Automatically computes the tag value.
set community Sets the BGP communities attribute.
set level (IP) Indicates where to import routes.
set local-preference Specifies a preference value for the autonomous system path.
set metric (BGP, OSPF, RIP) Sets the metric value for a routing protocol.
set metric-type Sets the metric type for the destination routing protocol.
set origin (BGP) Sets the BGP origin code.
set tag (IP) Sets the value of the destination routing protocol.