Cisco Nexus 3548

349
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
set origin
Related Commands Command Description
match as-path Matches a BGP autonomous system path access list.
match community Matches a BGP community.
match ip next-hop Redistributes any routes that have a next-hop router address passed by one
of the access lists specified.
match ip route-source Redistributes routes that have been advertised by routers and access servers
at the address specified by the access lists.
match metric Redistributes routes with the metric specified.
match route-type Redistributes routes of the specified type.
match tag Redistributes routes in the routing table that match the specified tags.
route-map Defines the conditions for redistributing routes from one routing protocol
into another.
set as-path Sets a BGP autonomous system path access list.
set community Sets the BGP communities attribute.
set level Indicates where to import routes.
set local-preference Specifies a preference value for the autonomous system path.
set metric Sets the metric value for a routing protocol.
set metric-type Sets the metric type for the destination routing protocol.
set origin Sets the BGP origin code.
set tag Sets the value of the destination routing protocol.