Cisco Nexus 3548

22
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
aggregate-address (BGP)
Conditional Aggregation Example
This example shows how to create a route map called MAP-ONE to match on an as-path access list. The
path advertised for this route will be an AS_SET consisting of elements contained in paths that are
matched in the route map.
switch# configure terminal
switch(config)# ip as-path access-list 1 deny ^1234_
switch(config)# ip as-path access-list 1 permit .*
switch(config)# route-map MAP-ONE
switch(config-route-map)# match ip as-path 1
switch(config-route-map)# exit
switch(config)# router bgp 64496
switch(config-router)# address-family ipv4
switch(config-router-af)# aggregate-address 10.0.0.0 255.0.0.0 as-set advertise-map
MAP-ONE
switch(config-router-af)# end
switch(config-router-af)#
Related Commands Command Description
route-map map-name Creates a route map.