Cisco Nexus 3548

423
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show hsrp
This command does not require a license but if you want to enable Layer 3 interfaces, you must install
the LAN Base Services license.
Examples This example shows how to display the default information about HSRP:
switch# show hsrp
This example shows how to display a brief summary of HSRP information:
switch# show hsrp brief
Related Commands Command Description
feature hsrp Enables the HSRP feature.