EasyManua.ls Logo

Cisco Nexus 3548

Cisco Nexus 3548
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
434
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip bgp all
Command Default None
Command Modes Any command mode
Command History
no-export-subconfed (Optional) Displays routes that are part of the well-known community
no-export-subconfed.
internet (Optional) Displays routes that are part of the well-known community
internet community.
extcommunity Displays routes that match an extended community.
4byteas-generic (Optional) Displays the routes that match the generic specifice extended
communities.
non-transitive (Optional) Displays the routes that match the non-transitive extended
communities.
transitive (Optional) Displays the routes that match the transitive extended
communities.
as4-number (Optional) AS number. The as4-number is a 32-bit integer in the form of a
plaintext integer or <higher 16-bit decimal number>.<lower 16-bit decimal
number> .
exact-match (Optional) Displays an exact match of the extended community.
dampening Displays all dampening information.
dampened-paths (Optional) Displays all dampened paths.
regexp expression (Optional) Display information that matches the regular expression.
history-paths (Optional) Displays all history paths.
parameters (Optional) Displays all dampening parameters.
neighbors Displays all BGP neigbors.
advertised-routes (Optional) Displays all the routes advertised to this neighbor.
flap-statistics (Optional) Displays flap statistics for the routes received from this
neighbor.
paths (Optional) Displays AS paths learned from this neighbor.
received-routes (Optional) Displays all the routes received from this neighbor.
routes (Optional) Displays the routes received or advertised to or from this
neighbor.
advertised (Optional) Displays all the routes advertised for this neighbor.
dampened (Optional) Displays all dampened routes received from this neighbor.
received (Optional) Displays all the routes received from this neighbor.
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
all (Optional) Specifies the VFR reserved all name.
Release Modification
5.0(3)A1(1) This command was introduced.

Table of Contents

Other manuals for Cisco Nexus 3548

Related product manuals