CHAPTER
6-1
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
6
Configuring the System
This chapter provides information about changing switch-wide configuration
settings. It includes command-line interface (CLI) procedures for using
commands that have been specifically created or changed for the
Catalyst 2900 XL or Catalyst 3500 XL switches. For complete syntax and usage
information for the commands used in this chapter, refer to the
Catalyst 2900 Series XL and Catalyst 3500 Series XL Command Reference.
This chapter does not repeat the concepts and CLI procedures provided in the
standard Cisco IOS Release 12.0 documentation. For switch features that use
standard Cisco IOS Release 12.0 commands, refer to the Cisco IOS Release 12.0
documentation on Cisco.com for additional information and CLI procedures.
For information about configuring these settings from Cluster Management Suite
(CMS), refer to the online help.
Note Some features can be implemented only by using the CLI.
To Next Page
Loading...
Need help?
General