Cisco WS-C2950-24 - Default Chapter; Candidate and Cluster Member; Command Switch Characteristics; Switch Software Releases

Contents
vi
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
CHAPTER 4 General Switch Administration 4-1
Basic IP Connectivity to the Switch 4-2
Switch Software Releases 4-2
Console Port Access 4-3
Telnet Access to the CLI 4-4
HTTP Access to CMS 4-5
SNMP Network Management Platforms 4-6
Using FTP to Access the MIB Files 4-7
Using SNMP to Access MIB Variables 4-7
Default Settings 4-9
CHAPTER 5 Clustering Switches 5-1
Understanding Switch Clusters 5-2
Command Switch Characteristics 5-2
Standby Command Switch Characteristics 5-3
Candidate and Cluster Member Characteristics 5-3
Planning a Switch Cluster 5-4
Automatic Discovery of Cluster Candidates 5-4
Standby Command Switches 5-5
IP Addresses 5-8
Passwords 5-8
Host Names 5-10
SNMP Community Strings 5-10
Management VLAN 5-11
Network Port 5-12
NAT Commands 5-12
LRE Profiles 5-13
Availability of Switch-Specific Features in Switch Clusters 5-13