6-63
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
Chapter 6 Configuring the System
Configuring TACACS+
Beginning in privileged EXEC mode, follow these steps to configure the
TACACS+ server:
Command Purpose
Step 1
tacacs-server host name
[timeout integer] [key string]
Define a TACACS+ host.
Entering the timeout and key parameters with this
command overrides the global values that you can enter
with the tacacs-server timeout (Step 3) and the
tacacs-server key commands (Step 5).
Step 2
tacacs-server retransmit
retries
Enter the number of times the server searches the list of
TACACS+ servers before stopping.
The default is two.
Step 3
tacacs-server timeout seconds Set the interval that the server waits for a TACACS+ server
host to reply.
The default is 5 seconds.
Step 4
tacacs-server attempts count Set the number of login attempts that can be made on the
line.
Step 5
tacacs-server key key Define a set of encryption keys for all of TACACS+ and
communication between the access server and the
TACACS daemon.
Repeat the command for each encryption key.
Step 6
exit Return to privileged EXEC mode.
Step 7
show tacacs Verify your entries.
To Next Page
Loading...
Need help?
General