Chapter 2 Getting Started with CMS
Cluster Manager and VSM
2-16
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
Device
Cisco Group Management
Protocol (CGMP)
Enable and disable the CGMP and the CGMP Fast Leave feature on a
switch.
Spanning-Tree Protocol (STP) Display and configure STP parameters for a switch.
LRE Profile Display the LRE profile settings for the Catalyst 2900 LRE XL
switches, and configure the speed of the LRE link.
Port
Port Configuration Display and configure port parameters on a switch.
Port Statistics Display the Ethernet and LRE link statistics.
Port Search Search for a port through its description.
Port Grouping (EtherChannel) Group ports into logical units for high-speed links between switches.
Switch Port Analyzer (SPAN) Enable SPAN port monitoring.
Flooding Control Enable broadcast storm control and block unicast and multicast
flooding on a per-port basis.
VLAN
VLAN Membership Display VLAN membership, assign ports to VLANs, and configure
Inter-Switch Link (ISL) and 802.1Q trunks.
Management VLAN
(VSM-specific)
Change the management VLAN on the switch.
VTP Management Display and configure the VLAN Trunk Protocol (VTP) for
interswitch VLAN membership.
VMPS Configuration
(VSM-specific)
Configure the VLAN Membership Policy Server (VMPS).
Security
Address Management Enter dynamic, secure, and static addresses into a switch address table.
You can also define the static addresses forwarding behavior.
Port Security Enable port security on a port.
Help
Contents List all of the available online help topics.
Legend Display the legend that describes the icons, labels, and links.
About Display the version number of VSM or Cluster Manager.
Table 2-9 VSM and Cluster Manager Menu Bars (continued)
Menu Bar Options Task
To Next Page
Loading...
Need help?
General