Chapter 2 Getting Started with CMS
Cluster Manager and VSM
2-20
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-05
Port
Port Configuration Display and configure port parameters on a switch.
Port Statistics Display the Ethernet and LRE link statistics.
Port Search Search for a port through its description.
Port Grouping (EC) Group ports into logical units for high-speed links between
switches.
Switch Port Analyzer (SPAN) Enable SPAN port monitoring.
Flooding Control Enable broadcast storm control, and block unicast and multicast
flooding on a per-port basis.
VLAN
VLAN Membership Display VLAN membership, assign ports to VLANs, and
configure ISL and IEEE 802.1Q trunks.
VTP Management Display and configure the VLAN Trunk Protocol (VTP) for
interswitch VLAN membership.
Security
Address Management Enter dynamic, secure, and static addresses into a switch address
table, and define the forwarding behavior of static addresses.
Port Security Enable port security on a port.
Monitoring
Bandwidth Graph Display a graph that plots the total bandwidth in use by the switch.
This feature is not available on the Catalyst 1900 and
Catalyst 2820 switches. For more information about bandwidth
graphs, refer to the online help.
Table 2-11 VSM and Cluster Manager Device Pop-up Menu (continued)
Pop-up Menu Options Task
To Next Page
Loading...
Need help?
General