GrpID LSP-Selector Status Failure Success RTT Latest Operation Time
100001 127.0.0.13 up 0 78 32 20:11:37.895 EST Feb 28 2005
100001 127.0.0.15 retry 1 77 0 20:11:37.995 EST Feb 28 2005
100001 127.0.0.16 up 0 78 32 20:11:38.067 EST Feb 28 2005
100001 127.0.0.26 up 0 78 32 20:11:38.175 EST Feb 28 2005
This table describes the significant fields shown in the display.
Table 21: show ipsla mpls lsp-monitor summary group Field Descriptions
DescriptionField
Group identifer that has been created by this MPLS
LSP monitor instance.
GrpID
LSP selector address.LSP-Selector
Status of the paths. Values can be as follows:
• up—Indicates that all the paths were successful.
• down—Indicates that all the paths were not
successful.
• partial—Indicates that only some paths were
successful.
• unknown—Indicates that some (or all) of the
paths did not complete a single LSP echo
request so the group status could not be
identified.
Status
Number of failures.Failure
Number of successes.Success
Round Trip Time (RTT) in milliseconds of the latest
LSP echo request for the path.
RTT
Time the latest operation cycle was issued for the
path.
Latest Operation Time
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
232 OL-24735-01
IP Service Level Agreement Commands
show ipsla mpls lsp-monitor summary
To Next Page
Loading...
