Cisco XR 1200 series User Manual

DescriptionField
Sum of squares of the positive jitter values from the
destination to the source.
Sum2PositivesDS
Sum of squares of the positive jitter values from the
source to the destination.
Sum2PositivesSD
Sum of squares of the negative jitter values from the
destination to the source.
Sum2NegativesDS
Sum of squares of the negative jitter values from the
source to the destination.
Sum2NegativesSD
Target IP address.Target Address
The output of the show ipsla statistics aggregated detail command varies depending on operation type. The
following sample output is from the show ipsla statistics aggregated detail command in tabular format,
when the output is split over multiple lines:
RP/0/0/CPU0:router# show ipsla statistics aggregated detail 2
Captured Statistics
Multiple Lines per Entry
Line1:
Entry = Entry number
StartT = Start time of entry (hundredths of seconds)
Pth = Path index
Hop = Hop in path index
Dst = Time distribution index
Comps = Operations completed
SumCmp = Sum of RTT (milliseconds)
Line2:
SumCmp2H = Sum of RTT squared high 32 bits (milliseconds)
SumCmp2L = Sum of RTT squared low 32 bits (milliseconds)
TMax = RTT maximum (milliseconds)
TMin = RTT minimum (milliseconds)
Entry StartT Pth Hop Dst Comps SumCmp
SumCmp2H SumCmp2L TMax TMin
2 1134423910701 1 1 0 12 367
0 1231 6 6
2 1134423851116 1 1 1 2 129
0 2419 41 41
2 1134423070733 1 1 2 1 101
0 1119 16 16
2 0 1 1 3 0 0
0 0 0 0
This table describes the significant fields shown in the display.
Table 25: show ipsla statistics aggregated detail Field Descriptions
DescriptionField
Entry number.Entry
Start time of entry, in hundredths of seconds.StartT
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 243
IP Service Level Agreement Commands
show ipsla statistics aggregated

Cisco XR 1200 series Specifications

General

Brand	Cisco
Model	XR 1200 series
Category	Network Router
Language	English