EasyManua.ls Logo

Cisco XR 1200 series - Page 257

Cisco XR 1200 series
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 1 127.0.0.8 Gi0/4/0/0.1 192.39.2.1 677
7 1 127.0.0.8 Gi0/4/0/0.2 192.39.3.1 677
8 1 127.0.0.8 Gi0/4/0/0.3 192.39.4.1 677
<end>
Hour Index: 14
Start Time Index: 13:20:57.323 UTC Tue Nov 27 2007
Number of Failed Operations due to a Disconnect : 0
Number of Failed Operations due to a Timeout : 122
Number of Failed Operations due to a Busy : 0
Number of Failed Operations due to a No Connection : 0
Number of Failed Operations due to an Internal Error: 0
Number of Failed Operations due to a Sequence Error : 0
Number of Failed Operations due to a Verify Error : 0
RTT Values:
RTTAvg : 21 RTTMin: 19 RTTMax : 212
NumOfRTT: 3059 RTTSum: 65272 RTTSum2: 1457612
Path Information:
Path Path LSP Outgoing Nexthop Downstream
Idx Sense Selector Interface Address Label Stack
1 1 127.0.0.1 Gi0/4/0/0 192.39.1.1 677
2 1 127.0.0.1 Gi0/4/0/0.1 192.39.2.1 677
3 1 127.0.0.1 Gi0/4/0/0.2 192.39.3.1 677
4 1 127.0.0.1 Gi0/4/0/0.3 192.39.4.1 677
5 1 127.0.0.8 Gi0/4/0/0 192.39.1.1 677
6 1 127.0.0.8 Gi0/4/0/0.1 192.39.2.1 677
7 1 127.0.0.8 Gi0/4/0/0.2 192.39.3.1 677
8 1 127.0.0.8 Gi0/4/0/0.3 192.39.4.1 677
This table describes the significant fields shown in the display.
Table 26: show ipsla statistics aggregated (with Path Discovery enabled) Field Descriptions
DescriptionField
Entry number.Entry Number
Start time.Start Time Index
Number of failed operations due to a disconnect.Number of Failed Operations due to a Disconnect
Number of failed operations due to a timeout.Number of Failed Operations due to a Timeout
Number of failed operations due to a busy error.Number of Failed Operations due to a Busy
Error that refers to the case in which the control
connection cannot be established.
Number of Failed Operations due to a No Connection
Number of failed operations due to an internal error.Number of Failed Operations due to an Internal Error
Number of failed operations due to a sequence error.Number of Failed Operations due to a Sequence Error
Number of failed operations due to a verify error.Number of Failed Operations due to a Verify Error
Round-trip time statistics appear on the specified
lines.
RTT Values
Maximum values of the RTT that are observed in the
latest cycle (*).
RTT Min/Avg/Max
Number of successful round trips.NumOfRTT
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 245
IP Service Level Agreement Commands
show ipsla statistics aggregated

Table of Contents

Related product manuals