Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
This command displays messages from the logging events buffer matching the description. The description
is matched when all of the conditions are met.
Task ID
OperationsTask ID
readlogging
Examples
This is the sample output from the show logging events buffer all-in-buffer command:
RP/0/0/CPU0:router# show logging events buffer all-in-buffer
#ID :C_id:Source :Time :%CATEGORY-GROUP-SEVERITY-MESSAGECODE: Text
#1 : :RP/0/0/CPU0:Jan 9 08:57:54 2004:nvram[66]: %MEDIA-NVRAM_PLATFORM-3-BAD_N
VRAM_VAR : ROMMON variable-value pair: '^['[19~CONFIG_FILE = disk0:config/startup, contains
illegal (non-printable)characters
#2 : :RP/0/0/CPU0:Jan 9 08:58:21 2004:psarb[238]: %PLATFORM-PSARB-5-GO_BID : Card
is going to bid state.
#3 : :RP/0/0/CPU0:Jan 9 08:58:22 2004:psarb[238]: %PLATFORM-PSARB-5-GO_ACTIVE :
Card is becoming active.
#4 : :RP/0/0/CPU0:Jan 9 08:58:22 2004:psarb[238]: %PLATFORM-PSARB-6-RESET_ALL_LC_
CARDS : RP going active; resetting all linecards in chassis
#5 : :RP/0/0/CPU0:Jan 9 08:58:22 2004:redcon[245]: %HA-REDCON-6-GO_ACTIVE : this
card going active
#6 : :RP/0/0/CPU0:Jan 9 08:58:22 2004:redcon[245]: %HA-REDCON-6-FAILOVER_ENABLED :
Failover has been enabled by config
This table describes the significant fields shown in the display.
Table 6: show logging correlator buffer Field Descriptions
DescriptionField
Integer assigned to each event in the logging events
buffer.
#ID
Correlation ID assigned to a event that has matched
a logging correlation rule.
C_id.
Node from which the event is generated.Source
Date and time at which the event occurred.Time
The category, group name, severity level, and
message code associated with the event.
%CATEGORY-GROUP-SEVERITY-MESSAGECODE
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
60 OL-24735-01
Alarm Management and Logging Correlation Commands
show logging events buffer
To Next Page
Loading...
Need help?
General
