Cisco XR 1200 series - source

Time stamp for the timestamp-hi-limit or timestamp-lo-limit keyword. The
month, day, and year arguments default to the current month, day, and year if
not specified.
Ranges for the hh : mm : ss month day year arguments are as follows:
• hh :—Hours. Range is 00 to 23. You must insert a colon after the hh
argument.
• mm :—Minutes. Range is 00 to 59. You must insert a colon after the mm
argument.
• ss—Seconds. Range is 00 to 59.
• month—(Optional) The month of the year. The values for the month
argument are:
◦
january
◦
february
◦
march
◦
april
◦
may
◦
june
◦
july
◦
august
◦
september
◦
october
◦
november
◦
december
• day—(Optional) Day of the month. Range is 01 to 31.
• year—(Optional) Year. Enter the last two digits of the year (for example,
04 for 2004). Range is 01 to 37.
hh : mm : ss [month] [day]
[year]
Displays events with a time stamp equal to or higher than the specified
time stamp.
timestamp-lo-limit
Command Default
None
Command Modes
EXEC
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01 59
Alarm Management and Logging Correlation Commands
show logging events buffer