Citrix SD-WAN Series - Page 73

Citrix SD-WAN Platforms
The following components are visible on the back panel of the 210 SE appliance:
Interface Port Labels Type Description
1 1/1 and 1/2 Bypass/FTW Fail-to-Wire
1/3 Traic Network traic
Management RJ-45 A copper Ethernet
(RJ45) management
port. The
management port is
used to connect
directly to the
appliance for system
administration
functions. You can
use this port for initial
provisioning of
Virtual WAN.
2 1/4 and 1/5 SFP and Ethernet
(combination ports)
Used as a
combination of SFP
and Ethernet one
each on the top and
bottom.
3 USB 2 USB ports
© 1999-2021 Citrix Systems, Inc. All rights reserved. 73