Citrix SD-WAN Series User Manual

Citrix SD-WAN Platforms
Interface Port Labels Type Description
9 Two antennas LTE antennas Antennas shipped
with the appliance.
Installing the LTE antennas
To use the Citrix SD-WAN 210 SE LTE appliance as an LTE modem, install the antennas to the appliance.
The antennas are included in the appliance package. The 210 SE LTE appliance has two SMA coax
male connectors at the front and rear of the appliances. The antennas have independent rotating
SMA female connectors.
Note
Ensure that both the LTE antennas are installed for better LTE cellular connectivity.
To install the antennas to the appliance:
1. Place the antenna SMA coax connector (F) on the appliance SMA coax connector (M) and rotate
the antenna connector clockwise, until the connector is tight.
Note
The recommended torque is 1.8–2.5 Lbs force-inch.
2. Adjust the antenna orientation and direction.
© 1999-2021 Citrix Systems, Inc. All rights reserved. 78

Citrix SD-WAN Series Specifications

General

Product Type	SD-WAN Appliance
Product Series	SD-WAN
Network Interfaces	Gigabit Ethernet
Performance	Varies by model
Form Factor	Rackmount
Management	CLI
Throughput	Varies by model
Interfaces	Ethernet
VPN Support	IPsec, SSL VPN
High Availability	Yes
Security Features	Firewall
WAN Optimization	Application Acceleration, Data Deduplication, Compression