Index-3
grep, 4-22
hd, 4-24
info, 4-26
kill, 4-31
kill_diags, 4-31
memexer, 4-32
memtest, 4-34
more el, 4-8
net, 4-39
net -ic, 4-39
net -s, 4-39
nettest, 4-41
set sys_serial_num, 4-45
show error, 4-46
show fru, 4-49
show_status, 4-52
sys_exer, 4-54
test, 4-56
test -lb, 4-56
Diagnostic commands list, 4-2
Diagnostics
power-up, 3-1
running in background, 4-1
showing status of, 4-52
SRM console, 4-1
Dial-in configuration, 7-24
Dial-out alert, 7-26
DIMM arrays, 6-42
DIMM isolation
failing DIMM lookup table, E-6
information required for, E-2
procedure, E-3
DIMM lookup table, E-6
DIMMs
aligning in MMB, 8-30
configuring, 6-42
part numbers, 8-3
Director, Compaq Analyze, 5-3
Display device
selecting, 6-5
verifying, 6-6
Display Error Frames screen, 5-22
Display System Configuration screen, 6-9
Displaying error frames, 5-20
Displaying FRU configuration, 4-49
Double error halts, 5-21
DPR, 1-21
clearing errors, 8-1, 8-9
error respository, 7-3
DPR layout, C-2
DPR locations
80, 82, 84, and 86, E-4
DPR locations A0:
A9, D-37
DPR memory addresses, E-2
DPR registers, D-1
680 correctable machine check logout
frames, D-37
680 fatal, D-41
power supply status, D-40
dump command (RMC), 7-20
E
ECC logic, 5-13
ei*0_inet_init environment variable, 6-15
ei*0_mode environment variable, 6-15
ei*0_protocols environment variable, 6-16
Enclosure panels
removing from a pedestal, 8-13
removing from a tower, 8-11
Enclosures, 1-4
env command (RMC), 7-18
Environment variables, 6-10, 6-12
setting, 6-11
Environment, monitoring, 7-18
Environmental error logout frame (680
correctable), D-45
Environmental errors captured by SRM, 5-18
Error beep codes, 3-22
Error frame
binary dump, 5-26
clearing log in AlphaBIOS, 5-23
deleting, 5-30
displaying in AlphaBIOS, 5-23
formatted text file, 5-28
saving to floppy, 5-27
text style, 5-24
viewing text-style, 5-24
Error handling tools, 2-9
Error log event structure map, 5-17
Error log format, 5-16
To Next Page
Loading...
Need help?
General
