Compaq AlphaServer ES40 - Page 438

Index-4
Error logs, 5-1
browsing in AlphaBIOS, 5-25
Windows NT, 5-20
Error messages
power-up, 3-22
RMC, 3-28
SROM, 3-30, 3-31
Error repository, clearing, 8-1, 8-9
Escape sequence (RMC), 7-10
Ethernet external loopback, 4-54
EV6 (21264) microprocessor, 1-15
EV6 registers, D-1
Event log, 3-19
Event structure map, 5-16
ew*0_inet_init environment variable, 6-15
ew*0_mode environment variable, 6-15
ew*0_protocols environment variable, 6-16
exer command, 4-16
Exercising devices, 4-16
Exercising memory, 4-32, 4-34
F
Fail-safe loader, 2-14, 3-24
activating, 3-32, 3-33
jumpers, 3-32
Fans, 1-26
part numbers, 8-2
replacing, 8-22
Fatal error halts, 5-21
Fault detection and correction, 5-12
Firm Bypass mode, 7-8
Firmware updates, 2-13, 3-25
Flash SROM, 3-9
Floppy diskette drive, 1-6
Floppy drive
part number, 8-4
removing, 8-38
floppy_write script, 4-21
Front doors, 1-32
FRU assembly hierarchy, 4-5
FRU descriptor, 4-6
FRU EEPROMs
viewing errors logged to, 4-46
FRUs
displaying physical configuration, 4-49
hot-plug, 8-8
locations, 8-6
part numbers, 8-2
tools for removing, 8-8
Function jumpers, 3-32
G
Graphics mode, 6-28
grep command, 4-22
Greycode test, 4-35, 4-36
H
Halt button, 1-11
with login command, 6-37
halt in/out commands (RMC), 1-11, 7-23
Halt LED, 1-11
Halt, remote, 1-11, 7-23
hangup command (RMC), 7-25
Hard Disk Setup screen, 6-22
Hard disk setup, AlphaBIOS, 6-22
Hard drive, removing, 8-24
Hard drives, 1-29
Hardware configuration
AlphaBIOS, 2-10
viewing, 6-8
Windows NT, 6-9
hd command, 4-24
Heap space, resizing, 3-14
heap_expand environment variable, 6-16
Hex dump, 4-24
Hot-plug FRUs, 8-8
I
I/O connector assembly, removing, 8-40
I/O connectors, 1-8
I/O control logic, 1-18
I/O implementation, 1-19
info 0 command, 4-26
info 1 command, 4-27
info 2 command, 4-28
info 3 command, 4-29
info 4 command, 4-30
info command, 4-26
Information resources, 2-13
Initialization screen, AlphaBIOS, 3-20
Interlock switch, 8-17