Index-6
Operating systems
errors reported by, 2-8
switching between, 6-50
switching to UNIX or OpenVMS, 6-52
switching to Windows NT, 6-50
Operator control panel. See OCP
Options, supported, 2-15
os_type environment variable, 6-5, 6-17
OSLOADER program, 6-27
P
Pagers, 7-27
PAL handler, 5-12
PALcode
error routines, 5-14
exception/interrupt handling, 5-12
Parallel port, 1-9
password environment variable, 6-17
Password protection, Windows NT, 6-38
Patches, 2-14
P-chips, 1-3
PCI backplane, 1-18
cables, 8-42
part numbers, 8-3
removing, 8-44
PCI bus implementation, 1-19
PCI buses, 6-47
PCI card
installing or replacing, 8-32
PCI card cage, 8-17
PCI jumpers, B-8
PCI slot locations
for VGA controller, 1-9
pedestal, 6-46
tower, 6-47
pci_parity environment variable, 6-17
PIC processor, 1-22, 1-23, 7-3
pk*0_fast environment variable, 6-18
pk*0_host_id environment variable, 6-18
pk*0_soft_term environment variable, 6-18
Platform logout frame register translation,
D-46
POK LED, 1-25
Ports, system rear, 1-9
Power button, 1-10
Power cords, 8-5
Power harness, removing, 8-51
Power LED, 1-11
power on/off commands (RMC), 1-11, 7-22
Power problems, 2-4
Power supplies, 1-24
configuring, 6-48, 6-49
installation order, 6-49
installing, 8-21
LEDs, 1-25
locations, 6-48
numbering, 6-48
redundant, 6-49
removing, 8-20
Power supply
part number, 8-4
Power-on, remote, 1-11
Power-on/off, from RMC, 7-22
Power-up diagnostics, 3-1
RMC, 3-2
SRM, 3-2
SROM, 3-2
Power-up display
SRM, 3-10
SROM, 3-8, 3-9
Power-up displays, 3-6
Power-up error messages, 3-22
Power-up memory failure, 3-9
Power-up memory test, AlphaBIOS, 6-23
Power-up procedure, 3-9
Power-up sequence, 3-3, 3-4
Processor card, 1-12, 1-14
Q
quit command (RMC), 7-10
R
RAID utility, running, 6-34
RCM tool, 2-11
Real failed array, finding, E-3
Redundant power supply, 6-49
Register translation, platform logout frames,
D-46
Registers, D-1
Registers (21272)
AAR0-AAR3, D-35
MISC, D-26
PERROR, D-31
To Next Page
Loading...
Need help?
General
