Compaq AlphaServer ES40 User Manual

Index-7
Registers (21272) DIRn, D-29
Registers (EV6)
Cbox Read, D-8
DC_STAT, D-6
EXC_ADDR, D-10
I_CTL, D-18
I_STAT, D-2
IER_CM, D-12
ISUM, D-14
MM_STAT, D-4
PAL_BASE, D-16
PCTX, D-23
Registers, displaying, 4-26
Remote management console. See RMC
Remote power-on/off, 7-22
Remote system management logic, 1-20
Removable media, 1-28
removing 5.25-inch device, 8-36
Removable media bays, 1-6
Removal and replacement, 8-1
Removing covers from chassis, 8-16
Removing enclosure panels, 8-10
from a pedestal, 8-13
from a tower, 8-11
Reset button, 1-11
reset command (RMC), 1-11, 7-23
Revision and Configuration Management tool,
2-11
RMC, 1-20, 2-10, 7-1
auxiliary power supply, 7-3
bypass modes, 7-6
CLI, 6-3, 7-10, 7-13
command conventions, 7-14
commands, 7-13
configuring call-out, 7-24
connecting from local VGA, 7-11
connecting from serial terminal, 7-10
data flow diagram, 7-4
dial-out alert, 7-26
dump command, 7-20
env command, 7-18
error information, 7-3
escape sequence, 7-10
exiting, 7-10
exiting from local VGA, 7-11
fatal error messages, 3-28
Firm bypass mode, 7-8
hangup command, 7-25
jumpers, 7-30
Local mode, 7-5
logic, 1-23, 7-3
operating modes, 7-4
overview, 1-23, 7-2
PIC processor, 7-3
quit command, 7-10
remote power on/off, 7-22
remote reset, 7-23
resetting to factory defaults, 7-30
set com1_mode command, 7-15
set escape command, 7-29
Snoop mode, 7-7
Soft Bypass mode, 7-7
status command, 7-16
terminal setup, 7-9
Through mode, 7-5
troubleshooting, 7-32
updating, 3-34
warning messages, 3-29
RMC and SPC jumpers, B-2
Run Maintenance Program dialog box, 6-30
S
SCB offsets, 5-14
SCSI breakouts, 1-9
SDD errors, 4-47
Security
SRM, 6-35
Windows NT, 6-38
Serial mode, 6-28
setting up, 6-31
Serial number mismatch, 4-47
Serial terminal, 1-32, 6-5
running utilities from, 6-32
set-up, 6-31
Service tools CD, 2-13
set com1_mode command (RMC), 7-15
set console command, 6-6
set envar command, 6-11
set escape command (RMC), 7-29
set heap_expand command, 3-14
set ocp_text command, 6-7
set password command, 6-35
set secure command, 6-36
set sys_serial_num command, 4-45
Setup, Windows NT, 6-20

Compaq AlphaServer ES40 Specifications

General

Brand	Compaq
Model	AlphaServer ES40
Category	Server
Language	English