Comtech EF Data CRS-300 - Front Panel LED Indicators; Switch Status LED Indicators

CRS-300 1:10 Redundancy Switch MN/CRS300.IOM
Front Panel Operation Revision 19
6–2
6.1.1 Front Panel LED Indicators
6.1.1.1 Switch Status LED Indicators
These three front panel LEDs are located adjacent to the keypad. They show
the operational status of the CRS-300 1:10 Redundancy Switch.
The LEDs function individually as follows:
LED
Condition
Description
UNIT STATUS
Green
Normal operation (no Switch Faults)
Red
Switch Fault, e.g., PSU fault or COMMS failure
STORED EVENT
Off
No Stored Events
Orange
Switch has Stored Events
Orange
(Flashing)
CAUTION – Switch is in MANUAL mode
REMOTE
Off
Switch is in Local Mode – remote monitoring is possible, but remote
configuration control is not allowed
Orange
Switch is in Remote Mode – configuration changes are disabled via the
front panel keypad