Connexity M6504 - Figure 85: Selection of a Status to Monitor; Status of External Trunks (Menu 4-6-2)

.
Page 116 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
4.6.2 STATUS OF EXTERNAL TRUNKS (MENU 4-6-2)
 For the Call Manager (F5): this menu is not available.
SELECTION OF A STATUS TO MONITOR
SEARCH STATUS ANY
ON TRUNK GROUP ......
FIRST PHYSICAL EQUIPMENT 10900
----------------------------------------
Figure 85: Selection of a status to monitor
SEARCH STATUS
ANY FREE BUSY PERM OFF-HOOK
COND.
FREE INCOMING
OUT OF SERVICE ALARM
MONITORI
NG
FREE LOCKING FREE CALLBACK
ON SERVICE WAITING LOCKING
Select a status and then a trunk group. When you validate your selection, the user
interface displays the list of extensions in the selected status on the selected trunk group.
ANY
To display the list of all lines with their current status.
FREE
To display the list of all lines in service and free.
BUSY
To display the list of all lines in conversation phase (call in
progress).
PERM OFF-HOOK
COND.
To display the list of all lines in permanent off-hook position.
FREE INCOMING
To display the list of all incoming leased lines in service and free.
OUT OF SERVICE
To display the list of all lines disabled by an MMC.
LOCKING
To display the list of all lines in blocking status with respect to the
public network.
ALARM MONITORING
To display the list of all lines with no T0 access activated.
FREE LOCKING
To display the list of all lines in fault status with respect to the
PBX.
FREE CALLBACK
To display the list of all lines in free state, but which will receive
automatic call-back.
ON SERVICE WAITING
To display the list of trunks waiting to be IN SERVICE.