Connexity M6504 - Figure 10: Equipment Card Management (M6504;M6540) (Continued); Figure 9: Equipment Card Management (M6504;M6540) (Continued)

.
PS8149KENAA01 15/09/2004 Page 27
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
Figure 9: "Equipment" card management (M6504/M6540) (continued)
CABINET 1
Expansion cabinet with an FP04MD (TELEPHONE + DATA) or a FP04ER back plan
(TELEPHONE only).
For card management in the system, the main cabinet back plane (FP04MD) is divided in
two:
♦ EQUIPMENT side for the EQT card type. (example: LRN or LAE type cards),
♦ MULTIBUS side for CLX card type (example: ADP (T2) or ADB (T0/S0) type
cards.
Figure 10: "Equipment" card management (M6504/M6540) (continued)