Connexity M6504 - Company;Department Specific Tones (Menu 5-5-4); Figure 183: Specific Tone (Single-Company)

.
PS8149KENAA01 15/09/2004 Page 199
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
5.5.5 COMPANY/DEPARTMENT SPECIFIC TONES (MENU 5-5-4)
 For the Call Manager (F5): Menu 5-3-3 (Company/department specific tones).
This MMC enables you to replace network tones with definable tones (single-company or
multi-company configuration).
5.5.5.1 SINGLE-COMPANY CONFIGURATION
SPECIFIC TONE
TONE EXTERNAL DIAL TONE
IS REPLACED BY DEFINABLE TONE
NUMBER (64 to 111) ...
Figure 183: Specific tone (single-company)
TONE
EXTERNAL DIAL
TONE
INTERNAL ON
HOLD TONE
NETWORK HOLD BF ANS: EXT FREE
BF ANS: FWD
OPCO FREE
AF ANS: EXT FREE AF ANS: opco FREE BF ANS: ext busy
AP REP AB OCC BF DAY RING BF NIGHT RING MEET-ME PAGING
BF ANS: DAY
DISSUA
BF ANS: NIGHT
DISSUA
AF ANS: DAY DISSUA AF ANS: NIGHT
DISSUA
Select the network tone to be allocated to the definable tone.
IS REPLACED BY DEFINABLE TONE (NUMBER 64 TO 111)
Enter the number of the definable tome (3 digits) which will replace the tone selected.