.
Page 118 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
4.6.3 STATUS OF DYNAMIC TRUNK GROUPS (MENU 4-6-3)
For the Call Manager (F5): this menu is not available.
The selection screen displays the status and name of the trunk group you wish to view.
SELECTION OF A STATUS TO MONITOR
STATUS SEARCHED ANY
OVER THE DYNAMIC TRUNK GP DYN S6
----------------------------------------
Figure 87: Selection of a status to monitor
On the screen Selection of a status to monitor, select:
♦ in the field "State searched", the status of the trunk group required
♦ in the field "Over the dynamic trunk GP", the name of the trunk group
When you validate your selection, the following display menu shows the physical trunk
groups used by the specified dynamic trunk group.
LINES <TRUNK GROUP STATUS> OVER <TRUNK GROUP NAME>
eqt ACCESS Tk gp STATUS IT.PH
------------------------------------------------
0-1-01 449 PCM.TG BUSY
----------------4510 IS AND M6501 IP PBX ---------------
-
Source Session Hardcopy
Begin More
Figure 88: Status of dynamic trunk groups
To Next Page
Loading...