Connexity M6504 - Non Isdn Signalling Paramters (Menu 5-6-2); Figure 199: Non ISDN Signalling Parameters

.
PS8149KENAA01 15/09/2004 Page 209
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
5.6.2 NON ISDN SIGNALLING PARAMTERS (MENU 5-6-2)
 For the Call Manager (F5): this menu is not available.
All signalling for connection to the public network, or recommended by the public carrier for
connection of PBXs, is specified in standards.
However, since carriers may differ from country to country even in the smallest amount,
and even if the signalling set-up remains the same, the signalling values require
modification (for example, Export).
IMPORTANT: Only modify the default values if you are entitled to do so.
Figure 199: Non ISDN signalling parameters