Connexity M6504 - Figure 143: Identification (F1); Figure 144: Identification (F6); Identification (Menu 5-4)

.
PS8149KENAA01 15/09/2004 Page 165
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
5.4 IDENTIFICATION (MENU 5-4)
IDENTIFICATION
1 SOFTWARE IDENTIFICATION
2 DISPLAY DIGITAL SET NAMES
3 MANAGEMENT OF DIGITAL SET NAMES
ENTER YOUR CHOICE .
--------------------------------------------------
Figure 143: Identification (F1)
IDENTIFICATION
1 SOFTWARE IDENTIFICATION
2 HARDWARE IDENTIFICATION
3 DISPLAY DIGITAL SET NAMES
4 MANAGEMENT OF DIGITAL SET NAMES
ENTER YOUR CHOICE .
--------------------------------------------------
Figure 144: Identification (F6)
 For the Call Manager (F5): Menu 5-2 (Identification). The menus "Hardware
identification", "Display digital set names" and "Management of digital set names" are
not available.