Connexity M6504 - Page 164

.
Page 164 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
COMMAND TYPE
DISCONNECT. CONNECT A --> B CONNECTION B --> A
CONNECTION A <--> B CONNECTION TONE --> A CONFERENCE A-B-C
CONF A TR, B/C REC A LOOP B1 CHANNEL A LOOP B2 CHANNEL
On this line, indicate the type of connection to be set up (call 1).
CALL 2
PHYSICAL SLOT A
Indicate the physical slot of the first equipment for the second call.
PHYSICAL SLOT B
Indicate the physical slot of the second equipment for the second call.
PHYSICAL SLOT C
Indicate the physical slot of the third equipment for the second call.
TONE
SILENCE TONE 330 HZ TONE 440 HZ HIGH TONE 440 HZ LOW
TONE 440 + 330 HZ INTERNAL MUSIC EXTERNAL MUSIC
Select the type of tone (call 2).
COMMAND TYPE
DISCONNECT. CONNECT A --> B CONNECTION B --> A
CONNECTION A <--> B CONNECTION TONE --> A CONFERENCE A-B-C
CONF A TR, B/C REC A LOOP B1 CHANNEL A LOOP B2 CHANNEL
On this line, indicate the type of connection to be set up (call 2).