Connexity M6504 - Figure 160: Selection of Tone Type; Tone and Announcement Definition (Menu 5-5-1)

.
Page 176 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
5.5.1 TONE AND ANNOUNCEMENT DEFINITION (MENU 5-5-1)
 For the Call Manager (F5): this menu is not available.
Figure 160: Selection of tone type
Menu 5-5-1 is used to configure the various tones and link them to pre-recorded
messages, by indicating the card type supporting the messages (CC1, BVF, CCS, SVF-
BVF), the slot number of the card in the PBX and the number of the message linked to the
tone.
INTERNAL
NORMAL DIAL TONE EXTERNAL DIAL TONE INTERNAT. DIAL TONE
ROUTING ON BUSY INTERNAL ON HOLD
TONE
INTRUSION TONE WARNING INTERN. RINGBACK
TONE
NETWORK RINGBACK
TONE
INTERNAL EXT. O.S. EXTERNAL O.S..
RESTRICTION FAIL PROGRAM AGENDA TONE CALL ACCEPTED TONE
CONGESTION TONE UNKNOWN NUMBER TONE ENTER PASSWORD
WAKE-UP RECALL MSG IN BOX ZERO CREDIT
MINIMUM CREDIT CONSULT. CALL INTRUS. SINGLE CALL
INTRUSION
CONSULT. CALL NO
INTR.
SINGLE CALL NO INTR. D.N.D ACTIV
VAR FRWD ACTIV AUTO CALLBACK ACTIV PREDEF. CBACK ACTIV
DISA PASSWORD DIRECTORY ENQUIRY