Connexity M6504 - Figure 33: Hardware Configuration (M6504;M6540)

To Next Page

To Previous Page

Page 56 15/09/2004 PS8149KENAA01

Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.

This document is the property of EADS and may not be copied or circulated without authorisation.

The TMS configured as NETWORK RAM can manage:

♦ 1 x 330 Hz tone generator (-8 dBmo)

♦ 1 x 440 Hz tone generator (-11 dBmo)

♦ 2 x 330/440 Hz tone detectors

♦ 2 x 4-party conferences

♦ 4 MF SOCOTEL transmitters

♦ 4 x MF SOCOTEL receivers

A second TOCH2 card can be fitted to the OCI card (optional).

Figure 33: Hardware configuration (M6504/M6540)

For each TMS TOCH1 (DSP2 and DSP3), TMS TOCH2 (DSP4 and DSP5), you must

select the DSP type and state.

TYPE

• • • • • • EXTENSION RAM NETWORK RAM

NETWORK RAM 2

For the DSP2, do not modify the default field EXTENSION RAM.

STATUS

IN SERVICE OUT OF SERVICE NOT EQUIP.

IN SERVICE Takes into account the TSMs and downloads them.

OUT OF SERVICE Put 1 TMS out of service.

NOT EQUIP. Used for downloading new TMS software.

LRN SYNC FOR 1

PCM ONLY

NO YES

Set YES for a public operator PCM and a PRIVATE PCM.