Connexity M6504 - Figure 124: Audit Start-Up Criteria

.
Page 144 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
4.7.7.1 AUDIT START-UP CRITERIA (MENU 4-7-7-1)
 For the Call Manager (F5): this menu is not available.
When you select this feature, the following screen is displayed:
AUDIT START-UP CRITERIA
FREQUENCY: HOURLY 0
FREQUENCY: DAILY 1
TIME OF START-UP 0
STAT: ACTIVE ACTION: ......
Figure 124: Audit start-up criteria
This menu is used to define the audit start-up criteria.
Auditing is set to be carried out periodically (hourly or daily) beginning at a start date. If the
frequency fields are set at 0, auditing will not be carried out.
FREQUENCY: HOURLY
Hourly (hh: from 0 to 23).
FREQUENCY: DAILY
Daily (dd: from 1 to 31).
TIME OF START-UP
Time the audit will start (hh: from 0 to 23).
STATUS
This field displays the current state of the audit, ACTIVE or INACTIVE.
ACTION
• • • • • • MODIFY CREATE SUPPRIMER
This field is used to create or delete an audit. It is also used to change the parameters for
running the active audit with new parameters.