.
Page 24 15/09/2004 PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
3.2.3 M6501L/R IP PBX CARDS
The M6501L has two cabinets: the main cabinet (0) and the expansion cabinet (1).
The slot number is therefore preceded by the cabinet number.
Example: Card 0-2 (second card of type 8 MIXD EXT. in cabinet 0)
Figure 5: Card management (M6501L/R)
Figure 6: Card management (M6501L/R) (continued)
When the system is powered on, the cards which do not have a processor, and which are
installed in the PBX, are identified and displayed automatically. The cards which have a
processor, such as CA1, LS1, CP1, CS1, are signalled as being in download status.
Slot 0-7 is used for the digital extensions of the OCT4 card.
To Next Page
Loading...